USG210 SYS LED Won't Stop Blinking
Options
The web interface to my USG210 stopped working (it would open in my browser but I was getting errors when attempting to log in) so I scheduled a reboot.
After the reboot however, the router does not appear to be able to complete the boot process. The SYS LED just flashes continuously (even after hours). I cannot log on to the console and none of the Ethernet ports are active.
A factory reset requires the SYS LED to have stopped blinking so I am unsure as to what to try next.
Hopefully someone can help.
Thanks,
Scott
After the reboot however, the router does not appear to be able to complete the boot process. The SYS LED just flashes continuously (even after hours). I cannot log on to the console and none of the Ethernet ports are active.
A factory reset requires the SYS LED to have stopped blinking so I am unsure as to what to try next.
Hopefully someone can help.
Thanks,
Scott
0
All Replies
-
Hi @BigTedThis symptom should coming from the firmware damage or hardware damage.Could you send me the console dumps in booting process by private message?1
-
0
-
For anyone who wants to know how this turned out.
Thanks to help from @Zyxel_Stanley, the problem appears to be faulty memory in the router and it will need a factory repair.0
Categories
- All Categories
- 396 Beta Program
- 2.1K Nebula
- 117 Nebula Ideas
- 81 Nebula Status and Incidents
- 5.1K Security
- 86 USG FLEX H Series
- 247 Security Ideas
- 1.3K Switch
- 69 Switch Ideas
- 916 WirelessLAN
- 34 WLAN Ideas
- 5.9K Consumer Product
- 211 Service & License
- 337 News and Release
- 71 Security Advisories
- 21 Education Center
- 5 [Campaign] Zyxel Network Detective
- 2K FAQ
- 912 Nebula FAQ
- 419 Security FAQ
- 237 Switch FAQ
- 207 WirelessLAN FAQ
- 46 Consumer Product FAQ
- 139 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 72 About Community
- 62 Security Highlight