firmware update
to ZLD ZLD4.35.
Recommended upgrade to ZLD4.30 C0 or later version first before upgrading
to ZLD4.33.
Recommended upgrade to ZLD4.20 patch2 C0 or later version first before
upgrading to ZLD4.30.
Recommended upgrade to ZLD4.13 patch2 C0 or later version first before upgrade to
ZLD4.20.
Accepted Solution
-
Hi @SandB,
On our USG40, the firmware version on two firmware partition are 411AALA2C0.bin originally.
I load your configuration file to USG40 and upload 4.35 to the standby partition.
USG40 is successfully upgraded from 4.11 to 4.35 in our lab.
If you still have concerns about the firmware upgrading, remember to save the startup-config.conf of USG40 first and then upload firmware 4.35 to "standby" partition.
5
All Replies
-
Hi @SandB,
On our USG40, the firmware version on two firmware partition are 411AALA2C0.bin originally.
I load your configuration file to USG40 and upload 4.35 to the standby partition.
USG40 is successfully upgraded from 4.11 to 4.35 in our lab.
If you still have concerns about the firmware upgrading, remember to save the startup-config.conf of USG40 first and then upload firmware 4.35 to "standby" partition.
5
Categories
- All Categories
- 392 Beta Program
- 2.1K Nebula
- 117 Nebula Ideas
- 81 Nebula Status and Incidents
- 5.1K Security
- 81 USG FLEX H Series
- 247 Security Ideas
- 1.3K Switch
- 69 Switch Ideas
- 913 WirelessLAN
- 34 WLAN Ideas
- 5.9K Consumer Product
- 209 Service & License
- 336 News and Release
- 71 Security Advisories
- 21 Education Center
- 5 [Campaign] Zyxel Network Detective
- 1.9K FAQ
- 904 Nebula FAQ
- 415 Security FAQ
- 236 Switch FAQ
- 206 WirelessLAN FAQ
- 46 Consumer Product FAQ
- 138 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 73 About Community
- 62 Security Highlight