[USG40W - SSL VPN] User Session Idle Timeout
Hi everyone,
is there a way to set an idle timeout for the SSL VPN Users on a Zyxel USG40W ?
My users connect to the SSL VPN tunnel using SecuExtender but if they forget to click on "Disconnect" after they're done, they are never disconnected.
So next time they want to use the VPN, they can't because they are already logged in.
Thanks for your help.
Accepted Solution
-
In object > user/group then edit user name you can set use manual settings lease time to 2mins but this may limit the time they stay connected but might be fine for SSL VPN or In object > user/group >settings tab Enable user idle detection for 3 mins or what you need to set it.
6
All Replies
-
In object > user/group then edit user name you can set use manual settings lease time to 2mins but this may limit the time they stay connected but might be fine for SSL VPN or In object > user/group >settings tab Enable user idle detection for 3 mins or what you need to set it.
6 -
Enabling user idle detection didn't work but decreasing Lease time worked like a charm.
Thanks PeterUK !
0 -
Categories
- All Categories
- 390 Beta Program
- 2.1K Nebula
- 116 Nebula Ideas
- 78 Nebula Status and Incidents
- 5.1K Security
- 51 USG FLEX H Series
- 247 Security Ideas
- 1.3K Switch
- 69 Switch Ideas
- 914 WirelessLAN
- 34 WLAN Ideas
- 5.9K Consumer Product
- 211 Service & License
- 332 News and Release
- 71 Security Advisories
- 21 Education Center
- 5 [Campaign] Zyxel Network Detective
- 1.9K FAQ
- 879 Nebula FAQ
- 414 Security FAQ
- 220 Switch FAQ
- 194 WirelessLAN FAQ
- 46 Consumer Product FAQ
- 137 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 72 About Community
- 61 Security Highlight