Nwa1123-ACV2

FrankIversenFrankIversen Member Posts: 75  Ally Member

Hi.

Does thie AP support wireless client mode so I can attach a printer to the network interface and use it wireless?

I can't seem to find the operating mode "wireless client" in the settings. Firmware is updated.

All Replies

  • IKLeIKLe Member Posts: 22  Freshman Member
    edited August 19, 2019 3:12PM

    @FrankIversen

    The NWA1123-AC v2 doesn't support client mode.

    If you really need the AP support client mode, you can find the Zyxel older model like NWA1100-NH, NWA1121-NI, NWA1123-NI or NWA1123-AC.

    They all support client mode!

    I have used one of them before~

  • FrankIversenFrankIversen Member Posts: 75  Ally Member

    why remove important and basic functionality when upgrading our accesspoint…...

  • Zyxel_PandaZyxel_Panda Zyxel Official Agent Posts: 34  mod

    Hi @FrankIversen

    NWA1123-AC v2 by default design does not support client mode but it supports WDS with root and repeater modes, it is because very few of our customers request the feature,therefore, we determined to obsolete this feature support and focus more on the enhancement for enterprise wireless mobility features.

    In fact we currently support another feature called: WDS with wireless bridge should be able to meet your application to attach a printer to the network interface and use its wireless.

    The topology of wireless bridge LAN:

    Internet <->LAN<-> (RootAP) <Wi-Fi> (Repeater AP) <->LAN<->Other LAN Device (like printer or so on)

    To enable bridging on the AP's GUI, select the option "Enable WDS Wireless Bridging" when you set up a repeater AP.

    It's supported on the new AP models: WAC6103D-I ,WAC6500 series and NWA1123-AC PRO APs.

  • RTH10RTH10 Member Posts: 15  Freshman Member

    Hello

    How one can enable WDS wireless bridging from NCC ?

  • IKLeIKLe Member Posts: 22  Freshman Member

    The WDS in NCC called Smart Mesh. The AP model support as below:


  • FrankIversenFrankIversen Member Posts: 75  Ally Member

    so if we use Smart mesh (what we of course would due when we want to use wireless client mode for the lan port), this will work?

  • Zyxel_PandaZyxel_Panda Zyxel Official Agent Posts: 34  mod
    edited August 27, 2019 5:52PM

    Hi @FrankIversen

    As @IKLe mentioned that WDS(in standalone AP) in NCC called Smart Mesh. But Smart mesh is not suitable for your current scenario, its function is to extend the wireless signal. Smart mesh with wireless bridge mode is the application that meets your requirement.

    It will be supported and released around mid-January next year, however it doesn't support on NWA1123-ACv2 AP, it will be supported AP models: WAC6103D-I ,WAC6500 series APs.

    Thanks!

  • RTH10RTH10 Member Posts: 15  Freshman Member

    Thanks Zyxel_Panda

    do you mean sometime by mid-Jan 2020 the WDS will be supported with NCC?

  • Zyxel_PandaZyxel_Panda Zyxel Official Agent Posts: 34  mod

    Hi @RTH10

    I mean Smart mesh with wireless bridge mode feature will be supported with NCC around mid-January 2020.

    Actually, the WDS term we called it for standalone AP. if AP is managed by NXC or USG controllers, the WDS term we called it Zymesh, however, if AP is in cloud mode which is managed by NCC, the WDS term we called it Smart mesh.

    Thanks!

Sign In to comment.