DAI IP Source Guard stopped showing as working on V4.50(AAND.3)

PeterUK
PeterUK Posts: 2,704  Guru Member
First Anniversary 10 Comments Friend Collector First Answer
edited August 2022 in Switch

I was on V4.50(AAND.2) and all was fine I could see the binding IP lease time but with V4.50(AAND.3) everything works but no show for binding IP leases. So is the setup i had working but nothing shows in IP Source Guard?

Accepted Solution

All Replies

  • Zyxel_Derrick
    Zyxel_Derrick Posts: 126  Zyxel Employee
    First Anniversary Friend Collector First Answer First Comment
    edited July 2019

    Hi @PeterUK


    Welcome to Zyxel community

    May I know the no show for binding IP leases refers to the web GUI display?

    After upgrading the firmware, the binding IP lease time disappear on web GUI, am I correct?

    Also, may I know the binding IP is static or DHCP?

    Thanks


    Zyxel_Derrick

  • PeterUK
    PeterUK Posts: 2,704  Guru Member
    First Anniversary 10 Comments Friend Collector First Answer

    Yes the binding IP lease time disappear on web GUI normally seen in Advanced Application > IP Source Guard > Source Guard Setup and for DHCP all the setup for Source Guard is their for like VLAN 50 and Trusted port.

    Source Guard Setup.png


  • Zyxel_Derrick
    Zyxel_Derrick Posts: 126  Zyxel Employee
    First Anniversary Friend Collector First Answer First Comment

    Hi @PeterUK


    Thanks for your information

    We have found the issue and is working on it

    If there is any update will let you know asap

    Thanks


    Best regards,

    Zyxel_Derrick

  • PeterUK
    PeterUK Posts: 2,704  Guru Member
    First Anniversary 10 Comments Friend Collector First Answer

    Hi the datecode firmware seems to be working Source Guard display is now showing.

    Thanks

Categories

Switch Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）