WDS link is down on root and repeater AP
Options
Seafood4847PUPU
Posts: 2 Freshman Member
Hi Everyone,
I'm trying to connect WiFi in a scenario where one AP is Root AP and other 3 APs are repeater AP.
All APs are NWA1123-ACv2.
I'm trying to connect WiFi in a scenario where one AP is Root AP and other 3 APs are repeater AP.
All APs are NWA1123-ACv2.
We have done the configuration that created WDS profile on Root AP and repeater AP but WDS link is not coming up.
Please kindly help check if any changes required.
0
Comments
-
Hi @Seafood4847PUPU ,
The WDS SSID and Pre-Shared Key must set the same between root AP and repeater.
Confirm the radio channel is fixed in the same channel between root AP and repeater AP.
For your case, you might need to set the root AP mac address in the repeater AP.
There is a FAQ can help you.
https://businessforum.zyxel.com/discussion/500/how-do-i-manually-set-the-uplink-mac-address-for-a-repeater-ap-by-using-zymesh
If you still has the problem, please send me the configuration.
Kathy
0 -
I think the root cause is that I did not use the same WDS profile name , I used "Zyxel_WDS" for repeater AP , but used "ZyXEL_WDS" for root AP, so it's caused by WDS link can not be created.
Thanks for your great help.0
Categories
- All Categories
- 392 Beta Program
- 2.1K Nebula
- 116 Nebula Ideas
- 78 Nebula Status and Incidents
- 5.1K Security
- 51 USG FLEX H Series
- 247 Security Ideas
- 1.3K Switch
- 70 Switch Ideas
- 907 WirelessLAN
- 34 WLAN Ideas
- 5.9K Consumer Product
- 211 Service & License
- 332 News and Release
- 71 Security Advisories
- 21 Education Center
- 5 [Campaign] Zyxel Network Detective
- 1.9K FAQ
- 880 Nebula FAQ
- 415 Security FAQ
- 220 Switch FAQ
- 195 WirelessLAN FAQ
- 46 Consumer Product FAQ
- 137 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 72 About Community
- 63 Security Highlight