VLAN From Draytek 2862 to GS1920-48HPv2
Options
I am attempting to use a Draytek 2862 to send VLAN tags to a new GS1920-48HPV2. I have set per the guide and a number of suggestions from the web. I have set as one VLAN range but cannot get working. In reality I would like to use combined tagging, IE use one cable from router to Switch, with multiple VLAN's but after 8 hours I am not getting anywhere. Can you advise if it is possible to use a Draytek and switch, And if combined Tagging is possible.
0
All Replies
-
Hi @Numberite
Welcome to the Zyxel community!
For starters, our switch GS1920v2-48HP can support VLAN tagging.
Let's have an example with Draytek 2862 configured as below
Configuration for GS1920v2-48HP:
1.
You should set whatever port which is connecting to router's P2 to be tagged-out, and fixed in VLAN 10, 11, 12.
2.
As for the ports that link to clients (such as PC), should be set untagged-out, and also fixed in VLAN 10, 11, 12.
You can find attached Handbook in chapter 2.1 How to configure the switch to separate traffic between departments using VLAN & 2.2 How to configure the switch to route traffic across VLANs for configuration instruction in detail.
Hope it helps.
Zyxel_Lucious0
Categories
- All Categories
- 385 Beta Program
- 2.1K Nebula
- 116 Nebula Ideas
- 80 Nebula Status and Incidents
- 5.1K Security
- 74 USG FLEX H Series
- 247 Security Ideas
- 1.3K Switch
- 70 Switch Ideas
- 907 WirelessLAN
- 34 WLAN Ideas
- 5.9K Consumer Product
- 210 Service & License
- 335 News and Release
- 71 Security Advisories
- 21 Education Center
- 5 [Campaign] Zyxel Network Detective
- 1.9K FAQ
- 886 Nebula FAQ
- 415 Security FAQ
- 228 Switch FAQ
- 199 WirelessLAN FAQ
- 46 Consumer Product FAQ
- 137 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 73 About Community
- 63 Security Highlight