[NEBULA] My vpn l2tp over ipsec client doesn't work

solidsnake74solidsnake74 Member Posts: 4  Freshman Member
edited June 2, 2020 4:45PM in Nebula Security Gateway
I make step-by step procedure but it doesn't work,,,,,i have tried with pc and android phone
· Share on Facebook

All Replies

  • CrazyTacosCrazyTacos Member Posts: 53  Ally Member
    Is your NSG using a public IP? If not, were you able to set port forwarding for UDP 4500 and 500?
    BTW, which procedure were you following?

    · Share on Facebook
  • solidsnake74solidsnake74 Member Posts: 4  Freshman Member
    I set 1:1 nat on my adsl company router. I see the router web based configuration when on browser type my public ip
    · Share on Facebook
  • CrazyTacosCrazyTacos Member Posts: 53  Ally Member
    You mean you can access the NSG's web UI using your public IP?
    In that case, do you see anything on the gateway event logs for VPN? Were you able to complete phase 1 at least?
    · Share on Facebook
  • solidsnake74solidsnake74 Member Posts: 4  Freshman Member
    Yes, i see the nsg web ui. I follow the sequence: add vpn user in cloud authentication, after create vpn like in the image. What else?
    · Share on Facebook
  • AlfonsoAlfonso Member Posts: 257  Master Member
    Hi @solidsnake74

    You need to verify if your ISP router is disturbing.
    So I suggest establishing the tunnel using an internal interface.
    If it works ... the ISP router is affecting your vpn, if it does not ... please try to provide logs.

    Regards 

    · Share on Facebook
  • Nebula_ChrisNebula_Chris Zyxel Offical Agent Posts: 320  mod
    edited December 17, 2018 3:36PM
    Hello @solidsnake74
    NSG L2TP support behind NAT scenario since September release, could you please re-active L2TP tunnel in control center then check VPN category in event log to confirm if NSG has receive the initiator packet. Feel free to let me know the result.

    Cheers~
    Chris
    · Share on Facebook
Sign In to comment.