USG210 - WiFI client unable to reach the DHCP from VLAN

dpower
dpower Posts: 3
First Comment
edited April 2021 in Security
Hi guys, I'm trying to achieve multi SSID network schema with USG210 and NWA5123. 
I had follow this example: https://businessforum.zyxel.com/discussion/1631/multi-ssid-how-make-it
But Wifi client can connect to the SSID and cannot get an address from the DHCP Pool. 
Please advise:) 

Comments

  • Ian31
    Ian31 Posts: 165  Master Member
    First Anniversary 10 Comments Friend Collector First Answer
    dpower,
    What's the ZONE of your vlan interface ?
    Do you add the firewall rule to allow the vlan ZONE to ZyWALL UDP port 67 (DHCP server) ?

  • The problem with DHCP was the switch. 
    But still I cannot get address from the correct vlan. From the WiFi I get always address from the default vlan1. If I try to connect to the same lan of the AP from my laptop with configured vlan (in example vlan10) - I can get address from the correct DHCP from vlan10. 
    What it can be?
  • Ian31
    Ian31 Posts: 165  Master Member
    First Anniversary 10 Comments Friend Collector First Answer
    The switch ports connect to USG and AP need to transfer tagged frame in and out for vlan10.
    In your case,
    client--->SSID (AP)<--->vlan10 tagged frame<--->siwtch<--->vlan10 tagged frame<--> (vlan10)USG

  • The guiding questions from your side helped me. Thanks a lot!

Security Highlight