Upgrading Firmware for a USG60 from V4.13(AAKY.0) to 4.32(AAPH.0)

Options

stephan

stephan Posts: 31

Freshman Member

First Anniversary

10 Comments

Friend Collector

August 2018 edited April 2021 in Security

I want to upgrade our long neglected USG60.

Logging into the dashboard, I see the current FW being V4.13(AAKY.0).

I want to upgrade to the recently released 4.32(AAPH.0)

In the firmware upgrade FAQ ( https://www.zyxel.com/support/zywall-usg-faq.shtml ), there is a PDF on how to upgrade from 4.20 to 4.25 for starters. But It doesn't say if that also applies to versions before 4.20. Additionally, FW versions < 4.30 are not listed in the myzyxel panel. Where would I get those?

Where can I find an upgrade path from 4.13 to the latest firmware?

0

Best Answers

PeterUK Posts: 2,714 Guru Member

August 2018 Answer ✓
Options
It might be best to go from V4.13 to V4.20 here

ftp://ftp2.zyxel.com/USG60/firmware/

then log on here and get V4.32

https://portal.myzyxel.com/

5
Zyxel_Stanley Posts: 1,366 Zyxel Employee

August 2018 edited August 2018 Answer ✓
Options
Hi @Stephan

You can upgrade firmware by this steps:

4.13 > 4.20 > 4.30 > 4.32

In firmware upgrading process may cased your configuration been reset.

If you would like to keep your configuration, you can send your configuration to me by private message, and I can help to verify it first.

I'll send you download link by private message.

5

All Replies

PeterUK Posts: 2,714 Guru Member

August 2018 Answer ✓
Options
It might be best to go from V4.13 to V4.20 here

ftp://ftp2.zyxel.com/USG60/firmware/

then log on here and get V4.32

https://portal.myzyxel.com/

5
PeterUK Posts: 2,714 Guru Member

August 2018 edited August 2018
Options
.

0
Zyxel_Stanley Posts: 1,366 Zyxel Employee

August 2018 edited August 2018 Answer ✓
Options
Hi @Stephan

You can upgrade firmware by this steps:

4.13 > 4.20 > 4.30 > 4.32

In firmware upgrading process may cased your configuration been reset.

If you would like to keep your configuration, you can send your configuration to me by private message, and I can help to verify it first.

I'll send you download link by private message.

5
stephan Posts: 31 Freshman Member

August 2018
Options
Hey guys!

Thanks. I ended up going V4.13 -> V4.20 -> V4.32.
Configuration was kept, so no issues there.

I now try to set up VPN from internal ports, since this should be supported now per https://businessforum.zyxel.com/discussion/1332/usg-60-l2tp-ipsec-vpn-not-working-from-local-lan2/p1?new=1

I'll see if I can figure it out on my own for now.

0
tech23847 Posts: 1

October 2020
Options
Thanks for sharing. We do have the exact same situation here!

0

Security Highlight

Security Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）