GS1900-10HP loses settings after power-off?

Poul_Nielsen
Poul_Nielsen Posts: 5
First Comment
edited August 2022 in Switch
Hi. I have a PoE Switch GS-1900-10HP wich loses ALL settings after power-off. Also if the power-off is just for a few seconds. (And then it boot up with IP 192.168.1.1 which is my routers IP !!! ) 
Is there anything to du about that? (A battery to change or ....) 

/ Poul Nielsen

Accepted Solution

All Replies

  • UPDATE.  After firmware update it still loses ALL settings af short power-off, but now it is default set to get an IP from DHCP. 

  • Zyxel_JonasTan
    Zyxel_JonasTan Posts: 94  Zyxel Employee
    First Anniversary 10 Comments Friend Collector First Answer

    Welcome to the Zyxel Community!

    Based on your description, is the "power-off" means to reboot the switch?
    If yes, may I know if did you try to click the "Save" button at the upper right corner, before rebooting the switch?
    And the firmware is the latest version 2.40(AAZI.1), right?


    Jonas
  • You are mostly right Jonas. I thought that pressing the "APPLY" buttom saved the configuration. (Like in other products I have tried.) So now I know the differens between Apply (which works for now) and Save (Which works after power-off. Thanks.