Can I create two volumes, RAID1 and RAID0 on two disk NAS326?
Options
Nick.l
Posts: 1
I currently have 2 disks in my NAS and RAID1 volume but running out of space. My idea is to have a RAID1 volume to keep the data that requires more protection and RAID0 for other data. I can't just do it from web-GUI, but I see a software RAID on my NAS, md0 for system, md1 for swap and md2 for data. So the idea is
* shrink ext4 on /dev/md2
* shrink md2 RAID1 using mdadm -G
* create fourth partition on each HDD (fdisk) and a RAID0 on them (mdadm).
* add a startup script to assemble and moint this RAID0 as /dev/md3.
Could anything be wrong with it, e.g. a configuration conflict or hard-coded requirement to have exactly 3 partitions on each internal storage will makes the device fail to find installed applications, etc?
0
All Replies
-
You can't configure both RAID types at the same two disks due to both types need two disks respectively. Therefore, you need four disks to create RAID 0 and RAID 10
Freshman MemberCategories
- All Categories
- 385 Beta Program
- 2.1K Nebula
- 116 Nebula Ideas
- 80 Nebula Status and Incidents
- 5.1K Security
- 74 USG FLEX H Series
- 247 Security Ideas
- 1.3K Switch
- 70 Switch Ideas
- 907 WirelessLAN
- 34 WLAN Ideas
- 5.9K Consumer Product
- 210 Service & License
- 335 News and Release
- 71 Security Advisories
- 21 Education Center
- 5 [Campaign] Zyxel Network Detective
- 1.9K FAQ
- 886 Nebula FAQ
- 415 Security FAQ
- 228 Switch FAQ
- 199 WirelessLAN FAQ
- 46 Consumer Product FAQ
- 137 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 73 About Community
- 63 Security Highlight
