Requests: Multy App - improve devices list
Options
chip
Posts: 14 Freshman Member
Issue: Devices list could be improved significantly:
a. There is no way to tell which AP the devices are connected to and the band they are using.
b. There is no way to tell which devices are uploading/downloading.
c. Most devices only show "*" as their name.
Request 1: add labels showing both the AP and wifi band (or wired) that the devices are connected to. See screen shot below for idea. Note, the device name itself could be truncated "..." to allow room for the information.
Request 2: add labels showing the speed if the devices is Downloading or Uploading. One idea is to show the down/up speed if the device is using more than 1MB/s. This does not need to be updated in realtime, but showing a snapshot of the devices bandwidth at the time the screen is loaded would helpful.
Request 3: Since most devices are showing "*" as their name, it is very confusing to manage the list of devices. If the device name is not known, I request/suggest that you identify the hardware vendor using a free public db. Here is one such list that is free and GNU General Public License to use: https://code.wireshark.org/review/gitweb?p=wireshark.git;a=blob_plain;f=manuf;hb=HEAD
Request 4: on the Devices Detail screen, I suggest you add the same labels from Request 1 and Request 3.
thank you
#MultyX_January
a. There is no way to tell which AP the devices are connected to and the band they are using.
b. There is no way to tell which devices are uploading/downloading.
c. Most devices only show "*" as their name.
Request 1: add labels showing both the AP and wifi band (or wired) that the devices are connected to. See screen shot below for idea. Note, the device name itself could be truncated "..." to allow room for the information.
Request 2: add labels showing the speed if the devices is Downloading or Uploading. One idea is to show the down/up speed if the device is using more than 1MB/s. This does not need to be updated in realtime, but showing a snapshot of the devices bandwidth at the time the screen is loaded would helpful.
Request 3: Since most devices are showing "*" as their name, it is very confusing to manage the list of devices. If the device name is not known, I request/suggest that you identify the hardware vendor using a free public db. Here is one such list that is free and GNU General Public License to use: https://code.wireshark.org/review/gitweb?p=wireshark.git;a=blob_plain;f=manuf;hb=HEAD
Request 4: on the Devices Detail screen, I suggest you add the same labels from Request 1 and Request 3.
thank you
#MultyX_January
1
Comments
-
Hi chip,Thanks for your suggestion and feature request in Multy X APP.We will evaluate and improve it.1
Categories
- All Categories
- 384 Beta Program
- 2.1K Nebula
- 117 Nebula Ideas
- 80 Nebula Status and Incidents
- 5.1K Security
- 79 USG FLEX H Series
- 247 Security Ideas
- 1.3K Switch
- 69 Switch Ideas
- 909 WirelessLAN
- 34 WLAN Ideas
- 5.9K Consumer Product
- 209 Service & License
- 335 News and Release
- 71 Security Advisories
- 21 Education Center
- 5 [Campaign] Zyxel Network Detective
- 1.9K FAQ
- 898 Nebula FAQ
- 415 Security FAQ
- 234 Switch FAQ
- 205 WirelessLAN FAQ
- 46 Consumer Product FAQ
- 137 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 73 About Community
- 62 Security Highlight