Creating several VPNs with different public IP addresses
All Replies
-
Hi @Kv3,
If you don't create virtual interfaces for other public IP addresses, you can also add NAT rule to bind the alternative IP on the interface.
Here are examples for your reference.
https://kb.zyxel.com/KB/searchArticle!gwsViewDetail.action?articleOid=016375&lang=EN
https://kb.zyxel.com/KB/searchArticle!gwsViewDetail.action?articleOid=016415&lang=EN
In Ethernet > wan, only 10.214.48.58 is configured.
In NAT setting, add a rule with the external IP using alternative IP 10.214.48.67.
Then you can create the VPN gateway by entering the alternative IP 10.214.48.67.
0 -
Hi, Emily
when I configure NAT, what IP address should I set in "User-Defined Internal IP" ?
0 -
Hi @Kv3,
The most important step is to configure the alternative IP address 12.34.56.212 - 12.34.56.215 in "External IP", so you can configure an inexistent internal IP address.
Actually, you can add up to 4 virtual interfaces for wan interface.
It would be simpler to create 4 virtual interfaces with the IP address 12.34.56.212 - 12.34.56.215 and use these wan virtual interfaces to build VPN tunnels.
0
Categories
- All Categories
- 347 Beta Program
- 2.1K Nebula
- 114 Nebula Ideas
- 77 Nebula Status and Incidents
- 5K Security
- 44 USG FLEX H Series
- 246 Security Ideas
- 1.2K Switch
- 65 Switch Ideas
- 901 WirelessLAN
- 33 WLAN Ideas
- 5.8K Consumer Product
- 204 Service & License
- 326 News and Release
- 71 Security Advisories
- 21 Education Center
- 5 [Campaign] Zyxel Network Detective
- 1.8K FAQ
- 831 Nebula FAQ
- 401 Security FAQ
- 219 Switch FAQ
- 190 WirelessLAN FAQ
- 45 Consumer Product FAQ
- 136 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 71 About Community
- 61 Security Highlight