XGS1930-52HP 10G port cannot link up

D_Shadow
D_Shadow Posts: 18  Freshman Member
First Anniversary Friend Collector First Answer First Comment
edited April 2021 in Nebula
I've bought 2 XGS1930-52HP, while connecting both switches with dac cable on port 49~52, it won't link up. I'm pretty sure that the dac cable is in good condition, because I've tested it on other device. Is there anyone here also encountering the same problem? Thanks in advance.

D,

Accepted Solution

  • Zyxel_Jonas
    Zyxel_Jonas Posts: 313  Zyxel Employee
    First Anniversary 10 Comments Friend Collector First Answer
    Answer ✓
    Hi @D_Shadow,

    You will need to access the local web GUI of the switch and change the port media type to "dac10g" mode to be able to link up using dac cable, as figure below:

    WEB GUI > Basic Settings > Port Setup



    Hope it helps.
    Jonas,
    Jonas,

All Replies

  • Zyxel_Jonas
    Zyxel_Jonas Posts: 313  Zyxel Employee
    First Anniversary 10 Comments Friend Collector First Answer
    Answer ✓
    Hi @D_Shadow,

    You will need to access the local web GUI of the switch and change the port media type to "dac10g" mode to be able to link up using dac cable, as figure below:

    WEB GUI > Basic Settings > Port Setup



    Hope it helps.
    Jonas,
    Jonas,
  • D_Shadow
    D_Shadow Posts: 18  Freshman Member
    First Anniversary Friend Collector First Answer First Comment
    Hi Jonas,

    At last, the link is up now.
    Thanks for the answer.
    Just wondering, why it cannot be configure on Nebula?

    D,
  • Zyxel_Jonas
    Zyxel_Jonas Posts: 313  Zyxel Employee
    First Anniversary 10 Comments Friend Collector First Answer
    Hi @D_Shadow,

    Thanks for the suggestion.
    I would like inform that, it was already included on our roadmap.
    Please stay tuned.  :)


    Jonas,

Nebula Tips & Tricks