vpn site to site
Options
damianodec
Posts: 42 Freshman Member
hi,
I need a VPN site to site, site A and B have USG40.
site A 192.168.6.x and USG40 192.168.6.254
site B 192.168.6.x and USG40 192.168.6.1
is it possible or have I to change addresses on A or B ?
thank you
I need a VPN site to site, site A and B have USG40.
site A 192.168.6.x and USG40 192.168.6.254
site B 192.168.6.x and USG40 192.168.6.1
is it possible or have I to change addresses on A or B ?
thank you
0
All Replies
-
Hi @damianodec
I do not think you can establish a VPN using yje same source and destination ip address range (I am assuming network netmask is /24).
If ip address range of the sites are not overlapped, the VPN be configured.
Another way to try to connect is to configure static NATs which will be done in (for example) in site A, and "undone" in site B. But i do not recommend it.
Regards
0 -
Check this article to avoid local subnet overlapping problem.
However, it could be managed easier if the network with different subnet.
https://kb.zyxel.com/KB/searchArticle!viewDetail.action?articleOid=014715&lang=EN
0 -
If you subnet each site to 255.255.255.128 then it would work.
0 -
thank you!0
Categories
- All Categories
- 384 Beta Program
- 2.1K Nebula
- 116 Nebula Ideas
- 80 Nebula Status and Incidents
- 5.1K Security
- 74 USG FLEX H Series
- 247 Security Ideas
- 1.3K Switch
- 70 Switch Ideas
- 907 WirelessLAN
- 34 WLAN Ideas
- 5.9K Consumer Product
- 210 Service & License
- 333 News and Release
- 71 Security Advisories
- 21 Education Center
- 5 [Campaign] Zyxel Network Detective
- 1.9K FAQ
- 886 Nebula FAQ
- 415 Security FAQ
- 228 Switch FAQ
- 198 WirelessLAN FAQ
- 46 Consumer Product FAQ
- 137 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 73 About Community
- 63 Security Highlight