ZyWALL as a client connecting to a VPN server
Accepted Solution
-
The first issue,the username cannot accept with "dot" on client mode.
Also, if you want toconfigure VPN tunnel interface, you need to select static IP on phase 1.
Currently, device cannot support this behavior. We will discuss and evaluate it internally.
5
All Replies
-
It seems does not possible, since the VPN remote policy can't fill FQDN(fr.freel2tpvpn.com) on Zywall.
0 -
Doing some testing theirs a bug for adding Enable Extended Authentication Client Mode with user name freel2tpvpn.com from saving as it has a dot.
So I got my VM setup with Remote Access (Server Role) with the following on ZyWALL 110
I then want to connect to that VPN over cellular1 on my VPN300 and this is how I set that up and the first problem is VTI does not allow Dynamic Address and the following does not connect.
0 -
The first issue,the username cannot accept with "dot" on client mode.
Also, if you want toconfigure VPN tunnel interface, you need to select static IP on phase 1.
Currently, device cannot support this behavior. We will discuss and evaluate it internally.
5
Categories
- All Categories
- 347 Beta Program
- 2.1K Nebula
- 114 Nebula Ideas
- 77 Nebula Status and Incidents
- 5K Security
- 44 USG FLEX H Series
- 246 Security Ideas
- 1.2K Switch
- 64 Switch Ideas
- 901 WirelessLAN
- 33 WLAN Ideas
- 5.8K Consumer Product
- 204 Service & License
- 326 News and Release
- 71 Security Advisories
- 21 Education Center
- 5 [Campaign] Zyxel Network Detective
- 1.8K FAQ
- 831 Nebula FAQ
- 401 Security FAQ
- 219 Switch FAQ
- 190 WirelessLAN FAQ
- 45 Consumer Product FAQ
- 136 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 71 About Community
- 61 Security Highlight