IPSec VPN subnet Lan1 is not reachable
Options
i have two IPSec Connection - same gateway.
Both connections are absolut identical, only the local network (Subnet) is ...
- lan1-Subnet (192.168.10.0/24)
- vlan10-Subnet, based on lan1 (192.168.200.0/24)
If i connect to 2. Connection, everything is fine - can reach each device on vlan 10
Connecting to 1. connection, i can only reach the router itself, but no device on lan1.
0
Accepted Solution
-
sorry, i have found the solution in my configuration.
the destination IPs (TPLink-Switches) are only reachable for admin, when source-ip is in VLAN1.
0
All Replies
-
sorry, i have found the solution in my configuration.
the destination IPs (TPLink-Switches) are only reachable for admin, when source-ip is in VLAN1.
0
Categories
- All Categories
- 385 Beta Program
- 2.1K Nebula
- 116 Nebula Ideas
- 80 Nebula Status and Incidents
- 5.1K Security
- 75 USG FLEX H Series
- 247 Security Ideas
- 1.3K Switch
- 70 Switch Ideas
- 908 WirelessLAN
- 34 WLAN Ideas
- 5.9K Consumer Product
- 211 Service & License
- 335 News and Release
- 71 Security Advisories
- 21 Education Center
- 5 [Campaign] Zyxel Network Detective
- 1.9K FAQ
- 886 Nebula FAQ
- 415 Security FAQ
- 228 Switch FAQ
- 200 WirelessLAN FAQ
- 46 Consumer Product FAQ
- 137 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 73 About Community
- 63 Security Highlight