ip address zyxewl usg 40
hi, on my zyxel there is a label with ip address (wrote in the first configuration) 192.168.10.254 but when I try to connect it by browser I do not get login screen but error link...
how can I to get right IP address ? have I to reset it ?
thank you
All Replies
-
by IP scanner I see IP 192.168.10.254 but ping it and not reply
0 -
Hi @damianodec,
Connect console to USG40 and use the following commands to check the status.
1. Check the IP address of each interface
Router> show interface all
2. Check the physical port of a certain interface
Router> show interface <interface name>
3. Check the port of HTTPS and from which zone the administrator can use HTTPS to access the web GUI.
Router> show ip http server secure status
4. List all firewall rules and check if the access from a specific interface to ZyWALL for HTTPS is allowed or denied.
Router> show firewall any any
1 -
hi @Zyxel_Emily
thank you, I'm try to connect usg 40 and COM1 by connect cable and Putty software:
Serial port, COM1, 115200, OPEN
but windows of connection give me just a green cursor on the top/left corner and nothing "welcome connections"...
any help?
0 -
Hi @damianodec,
Try to use the Tera Term and you can select the correct COM port from the list.
0 -
0
Categories
- All Categories
- 347 Beta Program
- 2.1K Nebula
- 114 Nebula Ideas
- 77 Nebula Status and Incidents
- 5K Security
- 44 USG FLEX H Series
- 246 Security Ideas
- 1.2K Switch
- 65 Switch Ideas
- 901 WirelessLAN
- 33 WLAN Ideas
- 5.8K Consumer Product
- 204 Service & License
- 326 News and Release
- 71 Security Advisories
- 21 Education Center
- 5 [Campaign] Zyxel Network Detective
- 1.8K FAQ
- 831 Nebula FAQ
- 401 Security FAQ
- 219 Switch FAQ
- 190 WirelessLAN FAQ
- 45 Consumer Product FAQ
- 136 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 71 About Community
- 61 Security Highlight