Trunks, VLAN, and uplinks.
Hello. I'm coming from an HP/Cisco background but I'm running into issues getting this GS1900-10HP switch connected to my network.
For this switch I'm concerned with three VLAN.
VLAN 1 - Default VLAN, the switch has an IP on this VLAN.
VLAN 60 - VOIP VLAN.
VLAN 150 - DATA VLAN.
The switch works fine connected to my HP switch via port 1, I can ping it and log into the menu. Under VLAN Port I have it untagged on VL1, and tagged on VL 60-150. Very HP'ish.
Now on port 2 I want to have a PC and a VOIP Phone. Normally on HP I'd have it untagged on VL150 and tagged on VL60 so I set it the same. I have it connected like this, Switch>phone>PC.
The phone works. But I cannot connect to the PC.
So to sum it up VLAN are as follows.
VL1 - Untagged 1, 2-8 excluded
VL 60 - Tagged 1-8
VL 150 - Tagged 1, Untagged 2-8
Port 1 is set as a VLAN Trunk as well. Do I need to set a PVID on each port?