Vlan GS1920
I have two GS1920 switchs and I am trying to segregate into 3 seperate vlans. The vlans have been created on a GS1920, I have 2 DHCP servers från differents routers. I wish to connect the router to the switch along a single port (24) in the switch and then send it to from port (4) to another switch port (2) which should accept both DHCP. They should no see each other Lan !
Thanks,
Comments
-
Hi @Paulo
Welcome to Zyxel community!
First, I assume both of your routers can recognize VLAN tagged packets.
Based on your scenario, you will need two different VLANs to separate the traffic.
Here is a configuration example (using VLAN 2 & VLAN 11),
On GS1920-1,
VLAN 2:
fixed port 4,24
tagged-out port 4,24
VLAN 11:
fixed port 4,12
tagged-out port 4,12
On GS1920-2,
PVID 11 for port 3
PVID 2 for port 4
VLAN 2:
fixed port 2,4
tagged-out port 2
untagged-out port 4
VLAN 11:
fixed port 2,3
tagged-out port 2
untagged-out port 3
Zyxel_Lucious
0
Categories
- All Categories
- 397 Beta Program
- 2.1K Nebula
- 116 Nebula Ideas
- 78 Nebula Status and Incidents
- 5.1K Security
- 52 USG FLEX H Series
- 247 Security Ideas
- 1.3K Switch
- 70 Switch Ideas
- 907 WirelessLAN
- 34 WLAN Ideas
- 5.9K Consumer Product
- 211 Service & License
- 332 News and Release
- 71 Security Advisories
- 21 Education Center
- 5 [Campaign] Zyxel Network Detective
- 1.9K FAQ
- 880 Nebula FAQ
- 415 Security FAQ
- 221 Switch FAQ
- 195 WirelessLAN FAQ
- 46 Consumer Product FAQ
- 137 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 73 About Community
- 63 Security Highlight