[NEBULA] How does Nebula devices communicate with Nebula Control Center ?
Options
Zyxel_CSO
Posts: 382 Zyxel Employee
There are four service ports currently being used for communicating between NCC and the Nebula devices.
Ports information can be also obtained on NCC > Help > Firewall information
Communication between Nebula devices and NCC is named Call Home and comprised of 4 steps as below
1. Get IP address/ DNS Server from local DHCP Server
By default, Nebula devices are DHCP clients. When they are powered on, they will try to get IP address
and DNS Server information from local DHCP Server.
2. NETCONF over TLS
Next, they will proceed TCP Handshake to Nebula Control Center and then Nebula Control Center will establish TLS (Transport Layer Security) Handshake to the devices. This phase is called NETCONF over TLS
3. Synchronization Time
They will be provisioned by Nebula Control Center with NTP setting to synchronize time.
4. Configure and Monitor
In the last phase, by sending get/ edit-config requests from Nebula Control Center to Nebula devices,
users can configure feature settings and monitor the status of the devices on Nebula Control Center
web GUI platform. Above two steps, we called Cloud Connection between Nebula devices and Nebula
Control Center.
- Port 4335 and 6667 are used in TCP for Nebula Cloud Management(NETCONF).
- Port 443 is used in TCP for Nebula Cloud Management(include firmware upgrade).
- Port 123 is used in UDP for Network Time Protocol(NTP).
Ports information can be also obtained on NCC > Help > Firewall information
Communication between Nebula devices and NCC is named Call Home and comprised of 4 steps as below
1. Get IP address/ DNS Server from local DHCP Server
By default, Nebula devices are DHCP clients. When they are powered on, they will try to get IP address
and DNS Server information from local DHCP Server.
2. NETCONF over TLS
Next, they will proceed TCP Handshake to Nebula Control Center and then Nebula Control Center will establish TLS (Transport Layer Security) Handshake to the devices. This phase is called NETCONF over TLS
3. Synchronization Time
They will be provisioned by Nebula Control Center with NTP setting to synchronize time.
4. Configure and Monitor
In the last phase, by sending get/ edit-config requests from Nebula Control Center to Nebula devices,
users can configure feature settings and monitor the status of the devices on Nebula Control Center
web GUI platform. Above two steps, we called Cloud Connection between Nebula devices and Nebula
Control Center.
3
Categories
- All Categories
- 385 Beta Program
- 2.1K Nebula
- 116 Nebula Ideas
- 80 Nebula Status and Incidents
- 5.1K Security
- 75 USG FLEX H Series
- 247 Security Ideas
- 1.3K Switch
- 70 Switch Ideas
- 908 WirelessLAN
- 34 WLAN Ideas
- 5.9K Consumer Product
- 211 Service & License
- 335 News and Release
- 71 Security Advisories
- 21 Education Center
- 5 [Campaign] Zyxel Network Detective
- 1.9K FAQ
- 886 Nebula FAQ
- 415 Security FAQ
- 228 Switch FAQ
- 200 WirelessLAN FAQ
- 46 Consumer Product FAQ
- 137 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 73 About Community
- 63 Security Highlight