USG 50 error by updating firmware
Comments
-
It's not suggested to jump from very old firmware to the latest. You may try upgrade by following sequence.
V2.21 => V3.00 => V3.30
Firmware can be downloaded from the official ftp site and login with anonymous account.
ftp://ftp2.zyxel.com
0 -
Maybe you can try to use firmware recovery to upgrade USG 50 to the latest version.Check Appendix 3. Firmware Recovery in the release note.ftp://ftp.zyxel.com/ZyWALL_USG_50/firmware/ZyWALL USG 50_3.30(BDS.9)C0.zip0
-
Dear customer,
Is it maybe because you tried to flash it with the zip file instead of the bin file.
(so unzip the (firmware).zip file)
and use the .BIN file instead.
kind regards
M
0 -
I believe you have received the answers, but compilation:
1, Backup your configuration, backup your configuration, backup your configuration.
2, Like Mark said: Make sure you unzip and upload the .bin file, not the .zip.
3, Like Blabababa said do not jump from such an old firmware directly to the latest one. His/Her suggestion on jumps is good: V2.21 => V3.00 => V3.30. If there are still issues try even smaller increments.
4, Do not do the upgrade by doing a firmware recovery as explained in appendix 3 in the release notes.
0 -
Hello IVIOJAN,
Is the issue solved after follow above good suggestion?
Charlie0
Categories
- All Categories
- 347 Beta Program
- 2.1K Nebula
- 114 Nebula Ideas
- 77 Nebula Status and Incidents
- 5K Security
- 44 USG FLEX H Series
- 246 Security Ideas
- 1.2K Switch
- 65 Switch Ideas
- 901 WirelessLAN
- 33 WLAN Ideas
- 5.8K Consumer Product
- 204 Service & License
- 326 News and Release
- 71 Security Advisories
- 21 Education Center
- 5 [Campaign] Zyxel Network Detective
- 1.8K FAQ
- 831 Nebula FAQ
- 401 Security FAQ
- 219 Switch FAQ
- 190 WirelessLAN FAQ
- 45 Consumer Product FAQ
- 136 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 71 About Community
- 61 Security Highlight