Creation and assignment of VLANs
Hi all,
I was trying to configure VLANs on Nebula CC but can't get it to work, what am I missing?
I need to set 3 VLANs for 3 different SSIDs.
SSID1 should be on VLAN1, SSID2 should be on VLAN2 and SSID3 should be on VLAN3 but able to access all VLANs.
I also need to configure the switch so that ports 1-8 are on VLAN1,... etc.
I can't find a screen to create and administer VLANs, all I did is set SSID VLAN ID to 2 for SSID 2, but it resulted in no internet on the SSID and clients not being able to reach a DHCP server (IP was 192.254.xxx.xxx).
Any ideas?
PS: I am sorry if some stuff I said is completely off, please point me in the right direction.
Also, if you have references to a guide please attach them, I did not find anything
Thank you very much
I was trying to configure VLANs on Nebula CC but can't get it to work, what am I missing?
I need to set 3 VLANs for 3 different SSIDs.
SSID1 should be on VLAN1, SSID2 should be on VLAN2 and SSID3 should be on VLAN3 but able to access all VLANs.
I also need to configure the switch so that ports 1-8 are on VLAN1,... etc.
I can't find a screen to create and administer VLANs, all I did is set SSID VLAN ID to 2 for SSID 2, but it resulted in no internet on the SSID and clients not being able to reach a DHCP server (IP was 192.254.xxx.xxx).
Any ideas?
PS: I am sorry if some stuff I said is completely off, please point me in the right direction.
Also, if you have references to a guide please attach them, I did not find anything
Thank you very much
Sign In to comment.
All Replies
We got a ticket that you created from the NCC, and replied as below for this issue.
Since we have a ticket to trace this issue, let's checking detail on the ticket if the issue is still not resolved by checking above settings.
Thanks.