vlan not found on one AP

Good evening everyone,

I thank in advance anyone who wants to contribute to the solution of my problem:
Network configuration:
ATP100 - GS1900-24HP - GS1200-5HP.v2 - 2 AP NWA1123 on Nebula
_____________________________________________________________________________________

ATP100 P3 P6 ports configured on LAN1, vlan4 is configure as follows

GS1900-24HP connected on P3 of ATP100 with vlan4 tag on port 1 and port 24, this access point connected to the switch works properly on both SSIDs

On GS1200-5HP connected to P6 of ATP100 with vlan4 on port 02 towards NWA1123

The access points have 2 SSIDs, the first with access to the LAN and the second with access to vlan4
NWA1123 controlled via nebula connected on port 01 of the GS1900-24HP
NWA1123 controlled via nebula connected on port 02 of the GS1200-5HP



My problem is the following:

Only on the access point connected to port 02 of the GS1200-5HP can I not acquire the IPs with the DHCP of the firewall and therefore I cannot navigate, I have no problems with the LAN SSID.
Anyone have any ideas about it? Thanks so much.



Best Answers

  • EdificaEdifica Member Posts: 2
    edited September 17, 2020 2:35PM Accepted Answer
    Thanks Lucious, actually I hadn't thought about it ... I thought it was enough to tag the firewall port where the Access Point is connected and not the port to the ATP (05), thank you very much. Resolved.


Sign In to comment.