SERVER WANtoLAN USG40
Options
antonellobellisario
Posts: 17 Freshman Member
Existing scenario:
how can I access via http to a lan client as show in the figure behind the server with 2 NICs and behind -USG40
HTTP ------->USG40>NIC_SERVER WAN > NIC_SERVER LAN >CLIENT_LAN
how can I access via http to a lan client as show in the figure behind the server with 2 NICs and behind -USG40
HTTP ------->USG40>NIC_SERVER WAN > NIC_SERVER LAN >CLIENT_LAN
0
Accepted Solution
-
@antonellobellisario
Regarding to your case,(One wan IP mapping to two lan server)
you need to configure the NAT rule with different port number, and then go to security policy to create the policy rule, source: any , destination: Lan servers' IP, Service: Http, allow.
EX:
1
All Replies
-
@antonellobellisario
Regarding to your case,(One wan IP mapping to two lan server)
you need to configure the NAT rule with different port number, and then go to security policy to create the policy rule, source: any , destination: Lan servers' IP, Service: Http, allow.
EX:
1
Categories
- All Categories
- 385 Beta Program
- 2.1K Nebula
- 116 Nebula Ideas
- 80 Nebula Status and Incidents
- 5.1K Security
- 75 USG FLEX H Series
- 247 Security Ideas
- 1.3K Switch
- 70 Switch Ideas
- 908 WirelessLAN
- 34 WLAN Ideas
- 5.9K Consumer Product
- 210 Service & License
- 335 News and Release
- 71 Security Advisories
- 21 Education Center
- 5 [Campaign] Zyxel Network Detective
- 1.9K FAQ
- 886 Nebula FAQ
- 415 Security FAQ
- 228 Switch FAQ
- 200 WirelessLAN FAQ
- 46 Consumer Product FAQ
- 137 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 73 About Community
- 63 Security Highlight