ZyWall USG20 - Old - VPN Setup
Options
MatteoBasso
Posts: 4
Hello everybody
I Have a ZyWall with Firmware 3.30(BDQ.5) 15/05/2014.
I Can't set-up VPN via L2TP. All the guides I have read or watched on Youtube has different method, maybe because the firmware is newer and little bit different.
Anyway, trying some solutions I can't connect.
Has Anyone a guide that could help me?
The Wizard doesn't have the L2TP option but only
Please help me.
Thank you
I Have a ZyWall with Firmware 3.30(BDQ.5) 15/05/2014.
I Can't set-up VPN via L2TP. All the guides I have read or watched on Youtube has different method, maybe because the firmware is newer and little bit different.
Anyway, trying some solutions I can't connect.
Has Anyone a guide that could help me?
The Wizard doesn't have the L2TP option but only
VPN Settings
- The later steps will guide you to setup the VPN.
- - Wizard Type
- - VPN Settings
- - Wizard Completed
VPN Settings for Configuration Provisioning
- The later steps will guide you to setup the VPN.
- - Wizard Type
- - VPN Settings
- - Wizard Completed
Please help me.
Thank you
0
All Replies
-
@matteosaitta
Go to VPN Settings>Express>Select Remote Access(Server role)>Enter the preshare key and local policy(Wan IP)>Press save
Go to the VPN> Ipsec VPN>VPN connection>Select rule you created>Create the address for local policy(Wan IP)
Go to L2TP> Select VPN connection rule, IP pool for l2tp client and allow user
Note: If established l2tp tunnel with Iphone, please select the related algorithm.
On VPN gateway profile,
On VPN connect profile,
0 -
@Zyxel_Charlie
Thank you for the reply. I have tried to do as suggested but doesn't work.
Let me show you....
1) VPN Connection
WIZ_VPN
I have created ad object named WAN as you told me, putting the firewall's public IP adress , than I have added the various Encryption proposals
So on VPN Gateway section I just putted the Pre-Shared Key and the Encryption list like the one before.
Finally on L2TP Section I Have created a "test" user with a password, an IP address pool.
Unfortunately it doesn't work. I don't know If I have to set something on Firewall rules.
Please help me,
thank you,0
Categories
- All Categories
- 384 Beta Program
- 2.1K Nebula
- 117 Nebula Ideas
- 80 Nebula Status and Incidents
- 5.1K Security
- 77 USG FLEX H Series
- 247 Security Ideas
- 1.3K Switch
- 69 Switch Ideas
- 907 WirelessLAN
- 34 WLAN Ideas
- 5.9K Consumer Product
- 209 Service & License
- 335 News and Release
- 71 Security Advisories
- 21 Education Center
- 5 [Campaign] Zyxel Network Detective
- 1.9K FAQ
- 898 Nebula FAQ
- 415 Security FAQ
- 234 Switch FAQ
- 205 WirelessLAN FAQ
- 46 Consumer Product FAQ
- 137 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 73 About Community
- 62 Security Highlight