[NEBULA] VPN L2TP WITH NEBULA

STIENTAFIREWALL
STIENTAFIREWALL Posts: 1
edited April 2021 in Nebula

Hi,

I try to enable a VPN L2TP over IPSEC on NEBULA GATEWAY NSG50

but not working, I used as a Client Windows 10 1909 versione, but the error is

Unable to establish network connection between the computer and the VPN server, the remote server is not responding. The problem may be caused by a network device such as a firewall, a NAT protocol or a router, between the computer and the remote server, which is not configured to allow VPN connections. To find the device causing the problem, contact the administrator.

Please, can you help me?

Thank you

Davide

CED Administrator

All Replies

  • ivers
    ivers Posts: 45  Freshman Member
    First Anniversary 10 Comments Friend Collector First Answer
    edited March 2020

    @STIENTAFIREWALL

    Is your NSG located behind the NAT gateway? You will need to configure the port forwarding on UDP port 500 and 4500 (in NAT gateway).

  • Zyxel_Chris
    Zyxel_Chris Posts: 653  Zyxel Employee
    First Anniversary 10 Comments Friend Collector First Answer

    Hello @STIENTAFIREWALL

    Welcome to the community.?

    Is your issue still persist? If so, you can share the event log in the post, you can find event log at Security gateway> event logs, filtered as VPN.

    Chris

Nebula Tips & Tricks