Thershold of hardware monitor

Hello I configured snmp service in XGS2210-24 switches so traps are sent to a snmp monitor. I have a question about this traps

zyHwMonitorFanSpeedOutOfR ange

zyHwMonitorTemperatureOut OfRange

zyHwMonitorPowerSupplyVolt ageOutOfRange


What is the threshold of that alarms that indicate that exist a problem in switch.?


I saw this image


I guess if mac temperature goes above 85, will switch send a trap?

I guess if fan1 speed goes below 500, will switch send a trap?

In voltaje section what mean of +-%6??


Thanks in advance

All Replies

  • Sorry, my switch is XGS3370

  • And what is the threshold with this traps

    zyHwMonitorPowerSupplyVolt ageOutOfRange

  • Zyxel_LukasZyxel_Lukas Zyxel Support Campus Agent Posts: 71  mod

    Hello @VictorZX,

    I have moved your post to the english switch section.

    Best regards

    Lukas

  • Zyxel_LuciousZyxel_Lucious Zyxel Official Agent Posts: 149  mod
    edited March 2, 2020 4:01PM

    Hi @VictorZX


    Kindly see my reply in bold.


    I guess if mac temperature goes above 85, will switch send a trap? Correct.

    I guess if fan1 speed goes below 500, will switch send a trap? Correct.

    In voltaje section what mean of +-%6??

    It means +-6% of the rated voltage.

    For example of rated 5V, 6% threshold of 5V equals 0.3V.

    In case the rated 5V is detected lower than 4.7V or higher than 5.3V, the switch will send a trap.


    The zyHwMonitorPowerSupplyVoltageOutOfRange monitors rated voltages in the HW monitor table.


    By the way, remember to check the trap options in Management -> Access Control -> SNMP -> Trap Group in case you need to monitor them via SNMP trap.

    Zyxel_Lucious

Sign In to comment.