No access to switch XS3700-24
I can't access to switch with WEB-Interface and Telnet.
I access to switch with console, but many errors on it.
To access with telnet I only can reboot the switch. But I have to enter to switch without reboot to backup configuration. If I reboot the switch without backup, I can lost data.
How can I enter to switch?
All Replies
-
This is with console. So many errors
0 -
Hi @Janbolat
Can you still access debug mode with console cable during booting?
▼
If yes, please refer to attachment to retrieve your ROM file.
https://us.v-cdn.net/6029482/uploads/719/7R4YE0F7FVH7.docxAnd then re-upload the latest firmware (.bin) and ROM file (the one you just downloaded) to see if you can recover the switch, find below for your action:
If debug mode is not available, it's probably a hardware issue and you may have to RMA (unfortunately the config is irretrievable).
Zyxel_Lucious
0 -
Hi @Janbolat
By the way, in case the retrieved ROM file doesn't recover the switch, please try default ROM as well to factory-reset it.
If possible, you can also send the broken ROM file (by PM) to us, we'll try to save your config.
Zyxel_Lucious
0 -
Thanks for answering. But I can't do it right now. Yesterday I just reboot the switch.
Later I'll do it and answer you.
0
Categories
- All Categories
- 347 Beta Program
- 2.1K Nebula
- 114 Nebula Ideas
- 77 Nebula Status and Incidents
- 5K Security
- 44 USG FLEX H Series
- 246 Security Ideas
- 1.2K Switch
- 65 Switch Ideas
- 901 WirelessLAN
- 33 WLAN Ideas
- 5.8K Consumer Product
- 204 Service & License
- 326 News and Release
- 71 Security Advisories
- 21 Education Center
- 5 [Campaign] Zyxel Network Detective
- 1.8K FAQ
- 831 Nebula FAQ
- 401 Security FAQ
- 219 Switch FAQ
- 190 WirelessLAN FAQ
- 45 Consumer Product FAQ
- 136 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 71 About Community
- 61 Security Highlight