[NEBULA] How to establish Site to Site IPSec VPN between Nebula Devices (NSGs) ?

Zyxel_CSO
Zyxel_CSO Posts: 375  Zyxel Employee
First Anniversary 10 Comments Friend Collector First Answer
edited June 2023 in Nebula Security Gateway
Prerequisite:
LAN (Private subnet) Networks cannot overlap between each site

Scenario 1 : Setup site to site VPN between Nebula devices (eg: NSG100 and NSG200) under the same organization
zhsmvmzfe05x.jpg


Configure Site to Site IPSec VPN on NSG200 in NSG200 site
1. Configure > Security gateway > Site-to-Site VPN


2. Select Outgoing interface and toggle on LAN1
1pc4xou3cwz9.png



3. Toggle on Nebula VPN enable, select Site-to-Site for Nebula VPN topology and save configuration
wcjoqbhtvz81.jpg


Configure Site to Site IPSec VPN on NSG100 in test Jason NSG100 site
4. Configure > Security gateway > Site-to-Site VPN


5. Select Outgoing interface and toggle on LAN1
n8spmwtpfyrz.png



6. Toggle on Nebula VPN enable, select Site-to-Site for Nebula VPN topology and save configuration
2zv0v3fdmdbg.jpg


7. Result of VPN IPsec Connection between Nebula Devices under same organization
  • VPN Site to Site Connect will take 5 minutes to take effect after correct configuration
  • Monitor > Security gateway > VPN connection in NSG200 Site
8ki4qe4akd9c.png

  • Monitor > Security gateway > VPN connection test Jason NSG100 Site
qb4xmrertdqj.png



Scenario 2 : Setup site to site VPN between Nebula devices under the different organizations
Please refer to this post.
Tagged: