XGS2210-52 VLAN to internet

Lorenzo_CRC_SistemiLorenzo_CRC_Sistemi Member Posts: 4  Freshman Member
Hi everyone;
i have an issue with intra vlan routing; this is my scenario:
USG110 (P1-2:wan, P4:vlan1
XGS2210-52 (vlan1  interface ip; vlan2 int. ip; vlan3 int. ip etc...)
default GW

Each client on vlans 2/3/etc... is configured with respective vlan interface ip as gateway.
Intra vlan traffic is ok, but i can't ping the external GW

If USG is used as gateway by clients (adding Vlans ip 192.168.2/3.251 on P4 port and configuring related policies) everything works fine.

But i don't want to use USG as vlan router... (it's a bottleneck when i move TB among vlans).

Additional configuration are required on XGS / USG ?

Thanks in advance


  • Zyxel_LuciousZyxel_Lucious Zyxel Official Agent Posts: 139  mod
    edited May 14, 2019 6:07PM
    Hi @Lorenzo_CRC_Sistemi

    Welcome to Zyxel community!

    Your configuration on XGS2210 is just fine.
    The problem is there are no static route rules on your USG to "route" traffic back to clients.

    Please go to web interface of USG: Network -> Routing -> Static Route
    Assign the gateway IP for destination IP and, etc.

    Please be aware that there might be some default interface, .3.1, .4.1 on USG. 
    You must change them to other IP to avoid confusion on static route.

    In this way the backward traffic will be forwarded from to, and then the XGS2210 handles "internal routing" to a specific VLAN interface, and to clients.

    Hopefully it helps.
  • Lorenzo_CRC_SistemiLorenzo_CRC_Sistemi Member Posts: 4  Freshman Member
    Great Lucious
Sign In to comment.