SSL VPN

I have set up SSL VPN and as a user I can connect. However, the client is not getting a IP address from the Zyxel 110. the Firewall LAN1 IP scope is 192.168.11.1 - .254 , with a DHCP range of 192.168.11.10 - .254. When a SSL VPN client connects it shows connected, how the IP address given is 192.168.11.0 .... and nothing from the DHCP range. I am using SSL VPN client v4.0.3.0 and the firmware on the Firewall is v.4.33 (AAAA.0).

All Replies

  • RickyRicky Member Posts: 3
    Disregard, I figured out the issue. The SSL VPN requires an assigned IP pool that is not on the local LAN1 scope.   I created a Virtual Scope under LAN1 and then added that as a RANGE in Object/Addresses.  once that was done I connected back the the SSLVPN and was handed out an IP within the Virtual Scope and life was good. 
  • Zyxel_StanleyZyxel_Stanley Zyxel Official Agent Posts: 717  mod

    Hi @Ricky  

    The VPN (SSL VPN/L2TP VPN) pool can’t overlap to other interfaces, otherwise the traffic unable pass into VPN tunnel successfully.

    It’s good hard you found the reason of it. :+1: 

Sign In to comment.