[NEBULA] VPN with Ubuntu 18.04
Goodmorning everyone,
With an NSG50 gateway I created a vpn l2tp ipsec. With windows working properly.
I'm trying to configure a linux client with ubuntu 18.04 but it doesn't connect.
I added l2tp support on ubuntu following this guide:
but still does not connect.
Are there any other parameters to add? I was thinking about the phase 1 and 2 algorithms but I can't find any settings on nebula to know how they are set.
Has anyone already addressed this problem?
Thank you!
0
All Replies
-
I can establish the tunnel successfully with Ubuntu is your NSG located behind the NAT gateway?
And is there any relevant clues in event log?0 -
no particular event in the event log. the NSG (nebula) is placed behind a router with the nat activated (NOT double nat). VPN with a windows client works correctly.
0 -
@MGK , I just follow the steps from the link you provide and I can establish L2TP VPN between my Ubuntu(18.0.4) and my NSG100.
I just use like what the website says:
Phase 1 Algorithms: 3des-sha1-modp1024
Phase 2 Algorithms: 3des-sha1
If you use different, maybe you may share what algorithms you use.
0 -
now works,it wasn't the phase one and two algorithms I had put in, but I had to deselect the use of PAP from the PPP settings.Thanks a lot!0
Categories
- All Categories
- 347 Beta Program
- 2.1K Nebula
- 114 Nebula Ideas
- 77 Nebula Status and Incidents
- 5K Security
- 44 USG FLEX H Series
- 246 Security Ideas
- 1.2K Switch
- 65 Switch Ideas
- 901 WirelessLAN
- 33 WLAN Ideas
- 5.8K Consumer Product
- 204 Service & License
- 326 News and Release
- 71 Security Advisories
- 21 Education Center
- 5 [Campaign] Zyxel Network Detective
- 1.8K FAQ
- 831 Nebula FAQ
- 401 Security FAQ
- 219 Switch FAQ
- 190 WirelessLAN FAQ
- 45 Consumer Product FAQ
- 136 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 71 About Community
- 61 Security Highlight