[NEBULA] How to access Nebula Devices from remote IP addresses ?
Options
Zyxel_CSO
Posts: 379 Zyxel Employee
Via NCC server name: d.nebula.zyxel.com.
1. Inbound access is unnecessary to configure under normal network setting
2. Outbound access will be required to open access(eg: Whitelist) for IP address and below ports if there is a default restriction for
outbound connection.
• TCP ports 4335 and 6667 are used for Nebula device management.
• TCP port 443 is used for Nebula Cloud Authentication (s.nebula.zyxel.com)
• UPD port 123 is used for Network Time Protocol(NTP)
1. Inbound access is unnecessary to configure under normal network setting
2. Outbound access will be required to open access(eg: Whitelist) for IP address and below ports if there is a default restriction for
outbound connection.
• TCP ports 4335 and 6667 are used for Nebula device management.
• TCP port 443 is used for Nebula Cloud Authentication (s.nebula.zyxel.com)
• UPD port 123 is used for Network Time Protocol(NTP)
0
Categories
- All Categories
- 397 Beta Program
- 2.1K Nebula
- 116 Nebula Ideas
- 78 Nebula Status and Incidents
- 5.1K Security
- 51 USG FLEX H Series
- 247 Security Ideas
- 1.3K Switch
- 70 Switch Ideas
- 907 WirelessLAN
- 34 WLAN Ideas
- 5.9K Consumer Product
- 210 Service & License
- 332 News and Release
- 71 Security Advisories
- 21 Education Center
- 5 [Campaign] Zyxel Network Detective
- 1.9K FAQ
- 880 Nebula FAQ
- 415 Security FAQ
- 221 Switch FAQ
- 195 WirelessLAN FAQ
- 46 Consumer Product FAQ
- 137 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 72 About Community
- 63 Security Highlight