Best Of
Re: Unable to automatically reconnect to the 6GHz SSID
For anybody else having similar issues, I was able to fix this by changing 6GHz channel selection from auto to manual and then trying different channels and then turning off wifi and then turning it back on until I found channels that seemed to work better with my phone and other devices.
Re: NBG7510 MAC filtering not working
Its the last version of the firmware that you mentioned, I updated it when the problem occured yesterday but it didnt solve it.
Its in the router mode und I try to set up MAC filtering on WIFI to only give permission to access the network to the mentioned devices in allow mode.
NR7102 - keeps interrupting connection
Hey,
so I have the 7102 installed on the roof, very close to antenna. Technically the speedtest shows 400 mbps download, but first crashes start when it tests for upload, it gets stuck at a randomly fixed rate.
When using the internet through it - its slow, keeps crashing, and the internet disappears on the network every minute or so.
This is what I tried:
- rebooting
- resetting to defaults
- different Sims (different providers)
- disabling / enabling DHCP
- disabling the power saving
- setting daily reboots
- changing cables
nothing seems to to work!
Thanks in advance for help!
Re: Firmware for old device ZyWALL USG 200
Great link for me.
Re: How to restrict Configuration access from WAN to Zywall?
II called Tech Support, and the answer was to Disable:
"Wiz_HTTP_Not_Restrict_0"
to Prevent WAN Access in Configuration>Security Policy> Policy Control:
Another issue I was having is inability to login into Web Configurator from a Windows 10 machine. I will post result of that finding under a different subject, because Tech had not seen this issue previously, and I know I'm not the only one who has encountered this issue.
Re: USG Flex 700 Port Forwarding
I changed it to any. See if it helps, thank you in advance.
That would be great, thank you. Functions should be the same, i think
Re: NXC2500 not accessible after failed upgrade
That's normally what I do on a first step, connecting the laptop with 192.168.1.10 to a Zyxel device for setup.
With this setting I attach 3 files:
CLI messages while booting
Network capture while booting
Network capture while sending a ping from NXC to laptop (192.168.1.1 to 192.168.1.10) with ICMP response. And a ping from laptop to NXC ( 192.168.1.10 to 192.168.1.1) without response.
Hint: You need to remove the .txt extension from the capture file names because I couldn't upload .pcapng files.
Thank you for your help.